Concrete Floor Grinding Machine

Concrete Floor Grinding Machine

Uses and features:

A series floor grinding machine use belt transmission, high speed planetary mill, automatic balance, smooth operation, can be used for coating removal, floor grinding and polishing, grinding diversity, can choose according to floor grinding  ;head parts 97% aluminum alloy parts, let the S6 into light grinding machine, apply to home market; Intelligence frequency control of motor speed, and can according to different ground, adjust the mechanical grinding speed, troubleshooting can increase the effect of use and convenience multi-usage, easy operation, good appearance, separate carrying, convenient handling, more human .Can be equipped with dust collection equipment, the realization of dry wet two kinds of working mode .

Technical Parameter

Model# Specification Accessories
QH-A6 Grinder 220V 1 Phase
Grinding motor 7.5HP
Inverter motor 7.5HP
AMPS 12
Small plate 0-1500RPM
Big plate 0-300RPM
Heads 3*260mm, 18 pads
Width 594mm
Water tank 30L
Dust port 2″
Magnetic plates 3 pcs
Velcro disk 3 pcs
CE approved plugs
Dust skirt 1 pc
Lifting jack 2 pcs
Tools box 1 set
Weight 280KG
HS code 8464209000
QH-A3 Grinder 220V 1 Phase
Grinding motor 5.5HP
Inverter motor 5.5HP
AMPS 8
Small plate 0-1500RPM
Big plate 0-300RPM
Heads 3*220mm, 18 pads
Width 535mm
Water tank 30L
Dust port 2″
Magnetic plates 3 pcs
Velcro disk 3 pcs
CE approved plugs
Dust skirt 1 pc
Lifting jack 2 pcs
Tools box 1 set
Weight 261KG
HS code 8464209000

Floor grinding Machine operation instruction:

1, remove from the packing machinery, flat on the ground

2 .tilted, chassis, chassis, with diamond or resin grinding according to the condition of the ground to fasten on grinding head installed on the mill, flat machine, and then the outer protective skirt to suitable location.

3, will be flat, three automatic adjustment pingdu, chassis nine grinding head to ensure the plane.

4, plugged in, the rotary switch to start the machine, and then transferred to the need of speed, which can be normal operation.

5, after the machine, can according to the intensity of the ground and treatment effect to choose the appropriate speed boost.

6, according to the requirements, choose dry milling or grinding, dry grinding to form a complete set of industrial vacuum cleaner

7, in operation, any abnormal phenomenon, please stop the machine immediately and check before reuse.

Floor grinding Machine safety attention matters:

1, the operator must wear waterproof insulation work shoes

2, before use, please connect the mechanical power supply and distribution box, distribution box to ensure that the leakage protection and overload protection

3, would you please check if the power cord to see if there is any breakage, aging, please welcome replaced immediately

4, the power cord to had better choose the line, to guarantee the power supply does not exceed 100 m length

5, it is strictly prohibited to mechanical pressure on turning

Scope of application:

Suitable for small area concrete ground. Stone material ground. The old and new epoxy. Art floor grinding and polishing, etc.

Other Types:

  ot1 ot2

Technical Parameter:

Model QM-300 QM-380
Weight 114Kg 130Kg
Voltage 380 V 380V
Engine power SIMENS 4KW SIMENS 3KW
Leveling depth 1-3 mm 1-3 mm
Rotating speed 800r/min 800r/min
Cleaning path 300 mm 380 mm
Dust collection power 1.2 KW 0.75 KW
Dust collection capacity 17 L 17 L
Production  5 m2/min   5 m2/min
NO.Grinding head 3 3
Warranty  1 Year  1 Year

 

 Pls Don’t hesitate to contact us ,then we will send other types to u for checking.